Current position:Home>>Product
Product
GTBZ 27
Platform height 26.7m
Working height 28.7m
Outreach 23.4m
Payload 250kg
Cummins Engine
4WD
Options available for:
Foamed filled tyre
Oscillating axle
Engine cool boot
AC Power to platform
Cool boot
GTBZ 27
Item | Measurement |
Dimensions | |
Overall length(stowed) | 12.4M (40ft) |
Overall width(stowed) | 2.49M (8ft) |
Overall height(stowed) | 2.8M (9ft) |
Ground clearance | 0.43M (1.4ft) |
Wheelbase | 3.0M (10ft) |
Overall weight | 15730kg (2WD) |
15800kg (4WD) | |
Platform Size (L*W*H) | 1.83*0.76*1.1M (6ft *2.5ft *3.6ft) |
Platform levelling | Automatic |
Tire specification | 12.00-20/85 |
Tire type | Solid |
Power | |
Hydraulic tank vol. | 170L |
Hydraulic system vol. (inc. the tank) | 270L |
Fuel tank vol. | 125L |
Control voltage | 12V |
Engine | Original Cummins/Perkins B3.3 80hp |
Drive & steer model | 2WD*2WS |
Productivity | |
Platform height max. | 26.7M (88ft) |
Working height max. | 28.7M (94ft) |
Horizontal reach max. | 23.4M (77ft) |
Turntable rotation | 360°continuous |
Platform rotation | 160° |
Platform Load capacity | 250kg (non-restricted) |
340kg (non-restricted) | |
Grade ability | 30% (2wd) |
45% (4wd) | |
Turning radius(outside) | 5.84M (19ft) |
Turning radius(inside) | 2.44M (8ft) |
Turntable tailswing | 1.32M (4.3ft) |
Max. Driving Speed | 5.2KM/H |
Driving Speed (stowed) | 0~5.2km/h |
Driving Speed (extended) | 0~1.1km/h |
Max allowable wind force | 12.5m/s |
Max allowable slope | 3° |
Max noise | 82dB(A) |
Max allowable side force | 400N |
Standard technical features | Options | ||
● Diesel engine powered | ● Hydraulic generator | ||
● Can Bus Technology with less hoses | ● Hydraulic welder | ||
● Proportional control | ● Hydraulic compressor | ||
● Platform & ground control panel | ● Hydraulic water pump | ||
● 360° continuous turntable rotation | ● AC power on the platform | ||
● 160° hydraulic platform rotation | ● Platform work lights | ||
● Automatic brake system | ● Anti-crash device on platform | ||
● Self-leveling platform | ● Foam-filled tyres | ||
● Onboard visible diagnostic system | ● 4WD | ||
● Cylinder holding valve | |||
● Controller calibration | |||
● Self-lock gate on platrorm | |||
● Anti-restart engine protection | |||
● Emergency stop button | |||
● European III emission engine | |||
● Hydraulic oil cooler | |||
● Flashing beacon | |||
● All motion alarm | |||
● Horn | |||
● Hour meter | |||
● Overload sensor with alarm | |||
● Tilt alarm | |||
● Solid tyre | |||
● Automatic extendable wheel axles | |||
● Jib | |||
Benefit for the applications | |||
● Telescopic boom type provides big working range to cover wide access area | |||
● High strength steel for booms for reduced weight with improved security. | |||
● Easy operating by joysticks for driving,steering, booms'up-down and turntable rotation | |||
which greatly improve the efficiency for working at height | |||
● Full scale gradient control make precise positioning for the operators when approaching | |||
● Self-leveling platform allow operation at ease | |||
● Rough terrain performance as 45% gradeability | |||
● Well hoses protection to prevent accident or help reducing replacing cost | |||
● Slide out engine tray to easily access for maintenance | |||
● Slide-out battery trays facilitate servicing | |||
● On-board visible diagnosis helps trouble shooting or provides inter-action between | |||
machines and operators at site to suit the working conditions | |||
● Security Device meeting EU standards in details to ensure safety | |||
Benefit for the transportation | |||
● Machine sizes suit the trailer chassis standards | |||
● Well-distributed weight distribution, to avoid uneven or lifting problems | |||
● Drivable onto the trailer through the ramp | |||
Standards compliance | |||
AS1418-2011, EN280-2010, JG/T 5300 | |||
Others | |||
Self-lubricating bearing | |||
Axis-pin and bushing-block for easy maintenance | |||
Galvanized chrome-plated | |||
R&D designed for 10 years usage |