Current position:Home>>Product
GTBZ 30
GTBZ 30

Platform height 30.4m
Working height 32.4m
Outreach 22.9m
Payload 250kg
Cummins Engine
4WD
Options available for:
Foamed filled tyre
Oscillating axle
Engine cool boot
AC Power to platform
Cool boot

GTBZ 30

Item Measurement
Productivity
Max. Platform height 30.4M
Max. Working height 32.4M
Max. Horizontal reach 22.3M
Turning radius(inside/outside) 2.56M /5.57M
Turntable tail swing  1.82
Turntable rotation 360°continuous
Platform rotation 160°
Grade ability 42% (4WD)
Platform Load capacity 340kg (non-restricted)
  480kg (restricted)
Driving Speed (stowed) 0~4.4km/h
Driving Speed (extended) 0~1.1km/h
Max allowable wind speed 12.5m/s
Max allowable slope
Max noise on normal use 82dB(A)
Max allowable side force 400N
Dimensions
Overall length(stowed) 13M
Overall width(stowed) 2.49M
Overall height(stowed) 3.08M
Ground clearance 0.43M
Wheelbase 3.66M
Platform Size (L*W*H) 1.45*0.85*1.24M
Overall weight 18760kg (4WD)
Tire specification 12.00-20/Solid
Hydraulic oil tank vol. 200L
Hydraulic system vol. 300L
Fuel tank vol. 200L
Control voltage 12VDC
Engine Original Cummins
Drive & steer model 4WD*4WS
Covering Parts Steel


Standard technical features   Options
   Diesel engine powered    Hydraulic generator
   Can Bus Technology with less hoses   ● Hydraulic welder
  ● Proportional control    Hydraulic compressor
   Platform & ground control panel    Hydraulic water pump
   360° continuous turntable rotation   ● AC power on the platform
   160°  hydraulic platform rotation    Platform work lights
   Automatic brake system    Anti-crash device on platform
  ● Self-leveling platform    Foam-filled tyres
   Onboard visible diagnostic system    
   Cylinder holding valve    
   Controller calibration    
   Self-lock gate on platrorm    
  ● Anti-restart engine protection    
   Emergency stop button    
  ● European III emission engine    
  ● Hydraulic oil cooler    
  ● Flashing beacon    
  ● All motion alarm    
  ● Horn    
   Hour meter    
  ● Overload sensor with alarm    
  ● Tilt alarm    
   Solid tyre    
  ● Automatic extendable wheel axles    
   4WD    
       
Benefit for the applications    
   Telescopic boom type provides big working range to cover wide access area
   High strength steel for booms for reduced weight with improved security.
   Easy operating by joysticks for driving,steering, booms'up-down and turntable rotation
     which greatly improve the efficiency for working at height
   Full scale gradient control make precise positioning for the operators when approaching
   Self-leveling platform allow operation at ease
   Rough terrain performance as 45% gradeability  
   Well hoses protection to prevent accident or help reducing replacing cost
   Slide out engine tray to easily access for maintenance
   Slide-out battery trays facilitate servicing  
   On-board visible diagnosis helps trouble shooting or provides inter-action between
     machines and operators at site to suit the working conditions
  Security Device meeting EU standards in details to ensure safety
       
Benefit for the transportation    
  Machine sizes suit the trailer chassis standards
  Well-distributed weight distribution, to avoid uneven or lifting problems
  Drivable onto the trailer through the ramp  
       
Standards compliance    
  AS1418-2011, EN280-2010, JG/T 5300  
       
Others    
  Self-lubricating bearing    
  Axis-pin and bushing-block for easy maintenance
  Galvanized chrome-plated    
  R&D designed for 10 years usage    

Home | Product | Service | Application | Interaction | About us | Contact us |
Tel:1800 330 269(Free Call) Fax: Mobile:+61 0467 049 430 Email:joanna@boomliftchinese.com
Copyright 2008-2013 Sinoboom Australia Pty Ltd, All Rights Reserved

online service

Skype: joanna.acecn