Product
    
  
  
  
 
GTBZ 32 
Platform height 32m
Working height 34m
Outreach 24.4m
Payload 250kg 
Cummins Engine
4WD
Options available for:
Foamed filled tyre
Oscillating axle
Engine cool boot
AC Power to platform
Cool boot
GTBZ 32
- 
    ModelsGTBZ32J

DimensionsPlatform height max.105 ft (32 m)Working height max.111 ft (34 m)Horizontal reach max.80 ft (24.4 m)
 Length - stowed46 ft (14.02 m)
 Width - stowed8 ft 2 in (2.49 m)
 Height - stowed10 ft 1 in (3.08 m)
 Wheelbase12 ft (3.66 m)Ground clearance1 ft 4 in (0.43 m)Platform size (L*W*H)4 ft 8 in*2 ft 8 in*4 ft 1 in (1.45 m*0.85 m*1.24 m)ProductivityMax. platform occupancy2Lift capacity551 lbs (250 kg) - UnlimitedTurntable rotation360° continuousPlatform rotation160°Drive speed - stowed0~2.7 mph (0~4.4 km/h)Drive speed - raised0~0.7 mph (0~1.1 km/h)Gradeability42%Outside turning radius8 ft 4 in (2.56 m)Turning radius - outside18 ft 3 in (5.57 m)Turntable tailswing6 ft (1.82 m)Max. allowable slope3°Max. noise on normal use82 dB(A)Drive & steer model4 WD * 4 WSTire size / type12.00 - 20 / solidPowerPower sourceOriginal Cummins/Perkins EngineFuel tank capacity52.83 gal (200 L)Control voltage12 VDCPower60 KWWeightOverall weight41491 lbs (18820 kg)Standards ComplianceCE/ ISO/ ADR/ ARAMCO
 
| Standard technical features | Options | ||
| ● Diesel engine powered | ● Hydraulic generator | ||
| ● Can Bus Technology with less hoses | ● Hydraulic welder | ||
| ● Proportional control | ● Hydraulic compressor | ||
| ● Platform & ground control panel | ● Hydraulic water pump | ||
| ● 360° continuous turntable rotation | ● AC power on the platform | ||
| ● 160° hydraulic platform rotation | ● Platform work lights | ||
| ● Automatic brake system | ● Anti-crash device on platform | ||
| ● Self-leveling platform | ● Foam-filled tyres | ||
| ● Onboard visible diagnostic system | |||
| ● Cylinder holding valve | |||
| ● Controller calibration | |||
| ● Self-lock gate on platrorm | |||
| ● Anti-restart engine protection | |||
| ● Emergency stop button | |||
| ● European III emission engine | |||
| ● Hydraulic oil cooler | |||
| ● Flashing beacon | |||
| ● All motion alarm | |||
| ● Horn | |||
| ● Hour meter | |||
| ● Overload sensor with alarm | |||
| ● Tilt alarm | |||
| ● Solid tyre | |||
| ● Automatic extendable wheel axles | |||
| ● 4WD ● Jib  | 
            |||
| Benefit for the applications | |||
| ● Telescopic boom type provides big working range to cover wide access area | |||
| ● High strength steel for booms for reduced weight with improved security. | |||
| ● Easy operating by joysticks for driving,steering, booms'up-down and turntable rotation | |||
| which greatly improve the efficiency for working at height | |||
| ● Full scale gradient control make precise positioning for the operators when approaching | |||
| ● Self-leveling platform allow operation at ease | |||
| ● Rough terrain performance as 45% gradeability | |||
| ● Well hoses protection to prevent accident or help reducing replacing cost | |||
| ● Slide out engine tray to easily access for maintenance | |||
| ● Slide-out battery trays facilitate servicing | |||
| ● On-board visible diagnosis helps trouble shooting or provides inter-action between | |||
| machines and operators at site to suit the working conditions | |||
| ● Security Device meeting EU standards in details to ensure safety | |||
| Benefit for the transportation | |||
| ● Machine sizes suit the trailer chassis standards | |||
| ● Well-distributed weight distribution, to avoid uneven or lifting problems | |||
| ● Drivable onto the trailer through the ramp | |||
| Standards compliance | |||
| AS1418-2011, EN280-2010, JG/T 5300 | |||
| Others | |||
| Self-lubricating bearing | |||
| Axis-pin and bushing-block for easy maintenance | |||
| Galvanized chrome-plated | |||
| R&D designed for 10 years usage | |||

