Current position:Home>>Product
GTZZ 15J
GTZZ 15J

Platform height 15.8m
Working height 17m
Outreach 8.5m
Payload 250kg
Cummins Engine
With Jib
Options available for:
Foamed filled tyre
4WD
Oscillating axle
Engine cool boot
AC Power to platform

GTZZ 15J

  • Models
    GTZZ15J



    small articulating boom lift



    15m small boom lift
     
    Dimensions
    Platform height max.
    49 ft (15 m)
    Working height max.
    55 ft (17 m)
    Horizontal reach max.
    27 ft 9 in (8.5 m)
    Up and over clearance max.
    24 ft 3 in (7.4 m)
     Length - stowed
    25 ft 2 in (7.68 m)
     Width - stowed
    7 ft 4 in (2.26 m)
     Height - stowed
    7 ft 1 in (2.16 m)
     Wheelbase
    6 ft 7 in (2.03 m)
    Ground clearance
    1 ft (0.32 m)
    Platform size (L*W*H)
    4 ft 8 in*2 ft 8 in*4 ft 1 in (1.45 m*0.85 m*1.24 m)
    Productivity
    Max. platform occupancy
    2
    Lift capacity
    551 lbs (250 kg)
    Turntable rotation
    355°
    Platform rotation
    160°
    Drive speed - stowed
    0~4.3 mph (0~7 km/h)
    Drive speed - raised
    0~0.7 mph (0~1.1 km/h)
    Gradeability
    30%(2WD) 40%(4WD)
    Turning radius - inside
    5 ft 9 in (1.8 m)
    Turning radius - outside
    14 ft 8 in (4.5 m)
    Turntable tailswing
    0 ft (0 m)
    Max. allowable slope
    3°
    Drive & steer model
    2 WD * 2 WS / 4 WD * 2 WS
    Tire size / type
    33*12 - 20 / solid
    Power
    Power source
    Perkins Engine
    Driving type
    Hydraulic
    Fuel tank capacity
    18.49 gal (70 L)
    Control voltage
    12 VDC
    Power
    37.3 KW
    Weight
    Overall weight
    15102 lbs (6850 kg) - 2WD
    15543 lbs (7050 kg) - 4WD
    Standards Compliance
    CE/ ISO/ ADR/ ARAMCO

 
Standard technical features Options  
  ● Diesel engine powered   ● Hydraulic generator  
  ● Proportional control   ● Hydraulic welder  
  ● Platform & ground control panel   ● Hydraulic compressor  
  ● 360° continuous turntable rotation   ● Hydraulic water pump  
  ● 160° hydraulic platform rotation   ● Overload sensor with alarm  
  ● Automatic brake system   ● AC power on the platform  
  ● Platform automatic leveling   ● Platform work lights  
  ● Onboard visible diagnostic system   ● Anti-crash device on platform  
  ● Slide-out engine tray   ● 4WD  
  ● Self-lock gate on platrorm   ● Oscillating axle  
  ● Emergency stop button   ● Foamed filled tyres  
  ● Cylinder holding valve      
  ● Satety electric pump      
  ● Tilt sensor with alarm      
  ● All Motion Alarm      
  ● Controller calibration      
  ● Anti-restart engine protection      
  ● Flashing Beacon      
  ● Horn      
  ● Hour meter      
  ● Safety brackets      
  ● Hydraulic oil cooler      
  ● Solid tyre      
  ● 2WD & 2WS on the chassis      
  ● Can-bus design with less loops and hoses      
  ● Jib      
         
Benefit for the applications      
  ● Articulated boom type makes easy access to hard-to-access areas over obstacles  
  ● High strength steel for booms for reduced weight with improved security.  
  ● Easy operating by joysticks for driving,steering, booms'up-down and turntable rotation  which greatly improve the efficiency for working at height  
     
  ● Full scale gradient control make precise positioning for the operators when approaching  
  ● Self-leveling platform allow operation at ease    
  ● Rough terrain performance as 40% gradeability    
  ● Well hoses protection to prevent accident or help reducing replacing cost  
  ● Slide out engine tray to easily access for maintenance  
  ● Slide-out battery trays facilitate servicing    
  ● On-board visible diagnosis helps trouble shooting or provides inter-action between machines and operators at site to suit the working conditions  
       
  ● Security Device meeting EU standards in details to ensure safety  
         
Benefit for the transportation      
  ● 2.26M in width, to suite the trailer chassis standards  
  ● Well-distributed weight distribution, to avoid uneven or lifting problems
● Drivable onto the trailer through the ramp
 
         
Standards compliance      
  AS1418-2011, EN280-2010, JG/T 5100      
         
Others      
  Self-lubricating bearing      
  Axis-pin and bushing-block for easy maintenance  
  Galvanized chrome-plated      
  R&D designed for 10 years usage      


Home | Product | Service | Application | Interaction | About us | Contact us |
Tel:1800 330 269(Free Call) Fax: Mobile:+61 0467 049 430 Email:joanna@boomliftchinese.com
Copyright 2008-2013 Sinoboom Australia Pty Ltd, All Rights Reserved

online service

Skype: joanna.acecn