Current position：Home>>ProductProduct
GTZZ 25
Platform height 24.6m
Working height 26.6m
Outreach 16.1m
Payload 230kg
Diesel Engine
Options available for:
Working light
Foam tire
Platform AC power
Caution light
Oscillating axle
Cold Boot
GTZZ 25
| Item | Measurement |
| Productivity | |
| Max. Platform height | 24.61M |
| Max. Working height | 26.61M |
| Max. Horizontal reach | 16.1M |
| Turning radius(inside/outside) | 3.00M /6.33M |
| Turntable tail swing | 0M |
| Turntable rotation | 360°continuous |
| Platform rotation | 160° |
| Grade ability | 45% (4WD) |
| Platform Load capacity | 230kg |
| Driving Speed (stowed) | 0~4.8km/h |
| Driving Speed (extended) | 0~1.1km/h |
| Max allowable wind speed | 12.5m/s |
| Max allowable slope | 3° |
| Max noise on normal use | 82dB(A) |
| Max allowable side force | 400N |
| Dimensions | |
| Overall length(stowed) | 11.36M |
| Overall width(stowed) | 2.48M |
| Overall height(stowed) | 3.16M |
| Ground clearance | 0.31M |
| Wheelbase | 3.05M |
| Platform Size (L*W*H) | 1.45*0.85*1.24M |
| Overall weight | 15900kg (4WD) |
| Tire specification | 385X65-24/Solid |
| Hydraulic oil tank vol. | 170L |
| Hydraulic system vol. | 110L |
| Fuel tank vol. | 135L |
| Control voltage | 12VDC |
| Engine | Original Cummins |
| Drive & steer model | 4WD*2WS |
| Standard technical features | Options | ||
| ● Diesel engine powered | ● Hydraulic generator | ||
| ● Proportional control | ● Hydraulic welder | ||
| ● Platform & ground control panel | ● Hydraulic compressor | ||
| ● 360° continuous turntable rotation | ● Hydraulic water pump | ||
| ● 160° hydraulic platform rotation | ● Overload sensor with alarm | ||
| ● Automatic brake system | ● AC power on the platform | ||
| ● Platform automatic leveling | ● Platform work lights | ||
| ● Onboard visible diagnostic system | ● Anti-crash device on platform | ||
| ● Slide-out engine tray | ● Oscillating axle | ||
| ● Self-lock gate on platrorm | ● Foamed filled tyres | ||
| ● Emergency stop button | |||
| ● Cylinder holding valve | |||
| ● Satety electric pump | |||
| ● Tilt sensor with alarm | |||
| ● All Motion Alarm | |||
| ● Controller calibration | |||
| ● Anti-restart engine protection | |||
| ● Flashing Beacon | |||
| ● Horn | |||
| ● Hour meter | |||
| ● Safety brackets | |||
| ● Hydraulic oil cooler | |||
| ● Solid tyre | |||
| ● 4WD | |||
| ● Can-bus design with less loops and hoses | |||
| Benefit for the applications | |||
| ● Articulated boom type makes easy access to hard-to-access areas over obstacles | |||
| ● High strength steel for booms for reduced weight with improved security. | |||
| ● Easy operating by joysticks for driving,steering, booms'up-down and turntable rotation | |||
| which greatly improve the efficiency for working at height | |||
| ● Full scale gradient control make precise positioning for the operators when approaching | |||
| ● Self-leveling platform allow operation at ease | |||
| ● Rough terrain performance as 40% gradeability | |||
| ● Well hoses protection to prevent accident or help reducing replacing cost | |||
| ● Slide out engine tray to easily access for maintenance | |||
| ● Slide-out battery trays facilitate servicing | |||
| ● On-board visible diagnosis helps trouble shooting or provides inter-action between | |||
| machines and operators at site to suit the working conditions | |||
| ● Security Device meeting EU standards in details to ensure safety | |||
| Benefit for the transportation | |||
| ● 2.48M in width, to suite the trailer chassis standards ● Well-distributed weight distribution, to avoid uneven or lifting problems ● Drivable onto the trailer through the ramp |
|||
| Standards compliance | |||
| AS1418-2011, EN280-2010, JG/T 5300 | |||
| Others | |||
| Self-lubricating bearing | |||
| Axis-pin and bushing-block for easy maintenance | |||
| Galvanized chrome-plated | |||
| R&D designed for 10 years usage | |||
